TI-FML-20 fiber laser marking system
TI-FML-20 is a 20 Watt fiber laser marking system.
​
The TI-FML-20 fiber marking laser is mainly used for marking , engraving and cutting of metals ( direct) . The advantages of the TI-FML-20 fiber laser are, the durability , very little maintenance , and the lower power consumption with respect to the YAG laser.
​
The TI-FML-20 fiber laser is fast and accurate and is therefore very suitable for production work and marking / engraving of small pieces of metal or plastic . Fiber lasers cannot engrave glass. Due to the wavelength of 1.064 micrometers, the laser will go through the glass. Fiber lasers can, through heat control, color plastics and metals which you can use to make color engravings (MOPA Fiber laser).
​
Very long lifespan
Fiber lasers have an average lifespan of 50000-100.000 hours . Fiber lasers are widely used for medical industry, data sheets, advertising companies, gift shops, engraving companies etc.
​
20W fiber laser marking machine
With us, it is the minimum laser power we sell, also with the lowest price.
​
It is mainly for marking on surface, such as steel, brass anodized aluminum and stainless steel. There is a limited capacity for engraving.
​
It cannot engrave too deep and the engraving time will be very long. In the meantime, the engraving result is also less good.
​
For instance:
​
It can engrave at most 0.5 mm deep on steel in about 30 minutes to an hour.
​
​
Work area
​
We supply various kinds of lenses for the TI-FML fiber marking laser machines (see menu Tools and accessories).
​
– 110 x 110 mm
– 150 x 150 mm
– 175 x 175 mm
– 200 x 200 mm
– 250 x 250 mm *
​
* A larger marking area result in less accuracy. It is advisable to keep in mind when using a galvanometric scanning head to use the marking area as small as possible.
​
Our TI-FML-20 fiber marking laser machines are supplied including:
​
-
Fiber laser 20 Watt
-
Professional controller system
-
Computer (fan less) with SSD hard drive, low energy consumption system. Monitor, keyboard and mouse
-
Marking software
-
Imported servo motors and drives from Japan
-
Red dot pointer ( red laser dot to indicate zero )
-
Auto-focus
-
Galvanometric scanning head
-
Focus lens
-
Safe enclosure with led light, special laser safety glass, user friendly design and connection for an air extraction unit
-
Training to make you familiar with your machine
-
2 year warranty
​
Overview in power differences:
20W fiber laser marking machine
​
With us, it is the minimum laser power, also with the lowest price.
​
It is mainly for marking on surface, such as steel, brass anodized aluminum and stainless steel. The capacity is limited for engraving.
​
It cannot engrave too deep and the engraving time will be very long. In the meantime, the engraving result is also less good.
​
For instance:
​
It can engrave at most 0.5 mm deep on steel in about 30 minutes to an hour.
​
30W fiber laser marking machine
​
30W has more peak power than 20W. In addition to the same marking, 30W can also engrave better.
​
For cutting, the marking machine can cut gold and silver. 30W also has better performance for this.
​
It can cut a maximum of 0.7 mm silver and 1 mm gold.
​
Based on that, regardless of the performance, but also based on the costs, 30W is also the most popular type.
​
50W fiber laser marking machine
​
50w can be seen as the updated version of 30W.
​
For choosing 50W, it is mainly for engraving and cutting.
​
Compared to 30W ,it will take almost half the time to engrave or cut the same materials.
​
Of course it can cut 0.3 mm thicker silver and 0.5 mm gold than 30W.
​
In short:
​
-
if you do not use deep mark or engraving, 20W is the first choice
-
If you mark and engrave often, but time is not a problem, you can consider 30W
-
If you need a higher engraving and cutting efficiency and you have the budget, choose 50W
-
​
In fact, 20W and 30W can meet 90-95% of the needs. 50W is then especially for demanding users or companies where time is a determining factor.
​
Request a Quotation:
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​
​