DWT_Pipe_Tools_240x140.png

Servo Drive for DLW cutting equipment

Essential tools for the Pipe fitter and Welder

RSW International, as the Official Distributor for DWT - PIPE TOOLS in Portugal, offers you the perfect solution for Cold Pipe cutting and beveling in your Pipe Shop or in the field.

Pipe edge preparation is the first and important step in the pipe welding process. Especially for heavy wall pipes the weld edge of the pipe end must be in a perfect shape to achieve the best welding result.
 

The new Servo-motor drive option.


To get the best performance in the machining process, many parameters are important: material, outside diameter, wall thickness, weld prep type, operator skills etc.

Usually the machines were equipped with pneumatic or hydraulic motors. Even though these drives deliver tremendous power, but due to lack of parameter control and information in the process the operator had to be very skilled and trained.

Nowadays, the
DLW Cutting equipment can be equipped with electrical driven servo drive motors, where speed, torque and current can be displayed, measured and stored during the cutting process. Additionally, this motor does not slow or strain under load. With this intelligent controller, the operator can work perfectly with different materials and pipe characteristics onsite, always choosing the correct settings by help of the controller.

The servo drive for the pipe cold cutting machines is delivered with geared motor and controller. It is available in a
230 V and 400 V version, furthermore, shock proof and corrosion proof with stainless steel housing, a big bright screen and emergency stop.

If you can't find what you are looking for here, don't hesitate to contact us at contact@rswinternational.pt or use our contactform and ask for a solution that fits your needs.

Servo Drive for DLW cutting equipment

Advantages:
  • Available in 230V and 400V

  • For our DLW Cutting and beveling equipment

  • Shock proof and corrosion proof

  • Big bright screen

  • Emergency stop

  • Speed, torque and current are controlled during the cutting & beveling process

press to zoom

press to zoom

press to zoom

press to zoom
1/5

Pipe Cold Cutting and Beveling:


✓ Pipe Cold Cutting Machine
✓ Clamshell Pipe Cold Cutter
✓ Several Equipments
✓ Machining of pipes on- site

2-pipe-cutting-and-beveling.jpg
1-pipe-cold-cutting.jpg

Pipe Cutting and Beveling Machine type CPC-B

For bigger pipes and heavier wall thicknesses,

Working Range OD: 6" (150 mm) - 276" (7.010 mm)

Wall thickness: Max. 2" (50 mm)

 

we offer the CPC-B Cutting machines check out more details here,

2-pipe-cutting-and-beveling-machine.jpg